PETG+ Pro Series 3D Printer Filament 1.75mm

Improve your print quality with our Pro Series PETG+ filament. We only use quality materials to produce our filament to ensure your printed parts outperform your design requirements.

Filament Specs:

• Hotend Temperature (°C): 220-245 (Recommended: 230)
• Bed Temperature (°C): 75-85 (Recommended: 80)
• Filament Diameter (mm): 1.75±0.05
• Net Weight: 1kg (2.2 lbs)
• Build Surface: Polypropylene or PEI

Print Parameters:

We have spent thousands of hours testing our filament with several printer types and recommend these printing settings.

• Default Print Speed: 30-60 mm/s (Recommended: 40 mm/s)
• First Layer Height: 0.28 mm*
• First Layer Speed: 15 mm/s
• Extrusion Width: 0.48 for 0.4 Nozzle (1.2X Nozzle Diameter)
• Retraction: Bowden 5mm @ 45 mm/s or Direct 2mm @ 45 mm/s
• Perimeter Print Speed: 70% of Default Print Speed
• Infill and Support Print Speed: 80% of Default Print Speed
• Fan Profile:
• Layer 1: 0%
• Layer 3: 25%
• Layer 5+: 50%
• XY Jerk: 8
• Z Jerk: 0.3
• E Jerk: 5
• Acceleration (Print/Travel): 300
• Retract Acceleration: 1000
• Travel Speed (non-print moves): 120 mm/s

*Special Notes:

Most users who are used to printing PLA tend to set their first layer height too low. PETG tends to build-up on the nozzle during the first layer causing adhesion issues. We recommend a first-layer thickness of 0.28mm.